Namco Bandai Games 1 Manual do Utilizador

Update 1AQUA JETROSTA SPRING SHAFT ASSEMBLYREPLACEMENT INSTRUCTIONS

TOOLS and PARTS REQUIREDRatchet HandleRatchet Handle Extension BarHex Sockets ... 10mm13mm17mm9/16„ AFSpanner ... 13mmPo

1. Remove 4off Hex Head Screws (M8x60). Raise the leveladjusters on the Ride Assembly and separate the ride assemblyfrom the monitor cabinet only suff

9. Disconnect the 3way and 9way connectorslocated at the base of the control arm on theright hand side.10. Remove 8off Hex Head Screws (M8x45) andrem

21. Remove the Hex Socket Head Screw (M12x16) and remove the Retaining Washer.22. Remove 4off Hex Head Screws (M6x16) and remove the Rosta Spring Brac

31. Repeat steps 27-30 to fit the other Swing Arm Assembly.32. Replace the Rosta Spring Shaft Assembly to the Main Base Assembly and fit, finger tight

43. Reconnect the two 2way connectorson the air valves. (The plugs can gointo either socket)44. Refit the Air Tubes to connectors Aand B. The tubes ar

54. Replace the Rubber Skirts and fixing bracketsusing the 8off Security Head Screws (M5x30)4ea side.55. Raise the level adjusters on the Ride Base an